Seon Mobile Surveillance Explorer Premier, Инструкция по установке и быстрому запуску

Страница: 3 / 14

Quick Installation Guide
700-0047 R002 3
Figure 1 Typical Plus System
Explorer® Premier
Typical Plus System Setup
Vehicle Electrical Interface Peripherals Seon System
Remote Microphone
*2
Smart-Link™
Supports Eight Cameras
IR Illuminators
Auxiliary Power
GPS Receiver
*1
2 wires
V 12V (red)
Vehicle Ground (black)
CONSTANT POWER
8 wires
Alarm 1 (orange)
Alarm 2 (blue)
Alarm 3 (violet)
Alarm 4 (gray)
Alarm 1-4 Ground (black)
4 wires
1A
10A
ALARMS
Red - Call Seon if using hall sensor
Green - Speed sensor high
Black - Speed sensor low
3 wires
SPEED
Diagnostic Indicator/
Alarm Button
4 wires
Explorer Premier DVR Rear Panel
*1
For better speed tracking, Seon recommends using a GPS receiver.
*2
If camera 1 and/or camera 2 are connected to only cameras, then the
Premier can support 2 remote microphones.
2 wires
Vehicle Sw 12V (yellow)
Vehicle Ground (black)
SWITCHED POWER
4 wires
2 wires
Left Turn (black)
Inertia Sensor (green)
Brake Signal (red)
Warning (brown)
Right Turn (white)
5 wires
SIGNALS
i.e. Inertia Sensor
i.e. Smart-Reach™
Mobile (Wi-Fi)
CAMERA8 CAMERA7 CAMERA6 CAMERA5 CAMERA4 CAMERA3 CAMERA2 CAMERA1
POWER
SMART
LINK™
AUX
POWER1
AUX
POWER2
AUDIO OUT VIDEO OUT
CONTROL
LAN2 LAN3
AUDIO1 AUDIO2
POWER IN
SIGNALS
ALARMS
AUX.
POWER
POWER OUT
TO DVR
INDICATOR
PANEL
GPS
CAN
GPS DB-9
SPEED