Seon Mobile Surveillance Explorer EX4 Plus 35 System, Инструкция по установке и эксплуатации

Страница: 60 / 100

Configuring the DVR
3–22 700-0058 R001
3.2.9. Using the Network Menu
The EX4 Plus 35 DVR has a built-in network interface for connecting to an office
network or to certain peripheral devices.
Use the Network menu to set the communication parameters necessary to use the
Ethernet connection on the EX4 Plus 35 DVR. Using the Network connection in
the DVR requires specific knowledge to which the DVR is being connected. A
qualified IT administrator is required to provide information about the network
and assist in configuring the Network menu.
To view the Network menu:
1. On the main menu, turn the
JOG
wheel to highlight
NETWORK
.
2. Press the
ENTER
button.
The
NETWORK
menu appears as shown in Figure 3-11.
To change a setting on the sub-menu:
1. Turn the
JOG
wheel clockwise or counter clockwise to change the value.
2. Press the
LOCK
> button to advance through the fields.
3. Press the
DISPLAY
< button to move back through the fields.
The selected menu item is highlighted with a pale blue background.
4. Press the
CLEAR
button to reload the default value into a field.
5. To exit the menu, press the
MENU
button.
6. Repeat these steps to set the menu items. See Table 3-14.
Figure 3-11
Network menu