8. Do not install or use the instrument in the location where generates noticeable inductive
interference, electrostatics or magnetic noise.
9. Keep the instrument away from the direct sunlight or radiation heat.
10. Do not use the instrument in a location of which the altitude is more than 2000 meters.
11. In the event of water leaking into the instrument, contact us or a dealer and ask for an
inspection before using in order to avoid any short circuits or fires.
12. To avoid any impact from inductive noises, the input signal line should be in a certain distance
from power lines or load lines.
13. Turn the main power switch off before wiring or exchanging sensors.
14. Do not connect any wire to unused terminals.
15. Verify the terminal polarity then perform the electric wiring correctly.
16. Install the switches or circuit breakers close to the operator in order to allow easy access.
17. Periodical maintenance is recommended to secure the safe operations.
18. Some components are expendable which have their own lifetimes, whereas some parts are
degraded with the passage of time.
19. We offer a two year guarantee for this instrument including its components, if it is properly used.
20. Do not move the Displacer with the Torsion Bar connected.
21. Pay attention to possible shocks during moving or installing it.
22. Try not to let moisture or dust get into the electric circuit.
23. Do not disassemble this instrument.
24. An additional explosion-proof cable gland should be used to the cable entry when installing this
instrument to a potentially explosive location.
25. Additional measures, such as a thermostat, air purging or vent hole should be considered to
prevent dew condensations inside the circuit.
The installation of Displacement Type Level Transmitter (SDT)
The installation of Displacement Type Level Transmitter (SDT)
The installation of Displacement Type Level Transmitter (SDT)
The installation of Displacement Type Level Transmitter (SDT)
should always be f
should always be f
should always be f
should always be followed by the instructions on this manual.
ollowed by the instructions on this manual.
ollowed by the instructions on this manual.
ollowed by the instructions on this manual.
