VISUAL INDICATORS
Each measurement should display in turn.
If a measurement does not appear, the respective sensor
damaged, has been removed from the device, or has been
selected not to appear through the
User’s Menu
(See ‘AQ Series
User’s Guide’).
BACnet Only:
The baud rate and MAC address must be configured before the
device begins transmitting.
The RX light (receiving indicator) will flash while data is being
received. If the RX light is not blinking, verify the wiring
configuration and wiring connections.
The TX light (transmitting indicator) will flash while data is
being transmitted.
HOME SCREEN
By default, the device displays one measurement at a time,
rotating between measurements every 10 seconds if multiple
sensor options are installed.
If the installer wants to change which values are displayed on
the LCD, access the
User’s Menu
(See ‘AQ Series User’s Guide’).
TROUBLESHOOTING
Symptom
Solution
No output
Check wiring. Ensure power supply
meets requirements.
Reading error
Verify unit is located away from
hot/cold sources.
Verify control panel software is
configured correctly.
Verify accuracy of test instrument.
Install insulation behind sensor to
prevent air flow from inside wall.
MENU OPTIONS
To access the full menu options use the ‘AQ Series User’s Guide’
manual online at www.senvainc.com/download_center.asp
The ‘AQ Series User’s Guide’ includes:
-User’s Menu
-Setup Menu
-Quick Start Menu
-Diagnostics
SENVA TECHNICAL SUPPORT
Need futher assistance? Call our toll-free number for live
technical support: (866) 660-8864 or feel free to email us at
DIMENSIONS
AQD Dimensions
AQO Dimensions
OBJECT LIST MANUAL
For further reading access the object list and conformance
statement ‘AQ Series BACnet Protocol Guide’ found online at
www.senvainc.com/download_center.asp
The ‘AQ Series BACnet Protocol Guide’ includes:
-Protocol Implementation Conformance Statement
-Supported Objects
-Supported Properties
