SENTRY II 972SM Series, Руководство по эксплуатации и обслуживанию

Страница: 17 / 48

17
Screen 2
Control Valve Programming
Set the Time of Day
The time of day should only need to be set after initial installation or after an extended power outage. If an
extended power outage has occurred, the time of day will flash indicating that it needs to be set.
Step 1 - Press SET CLOCK
Step 2 - Current Time of Day - Hours: Adjust to the correct hour by pressing the UP or
DOWN arrow button. Press NEXT to go to Step 3.
Step 3 - Current Time of Day - Minutes: Adjust to the correct minutes by pressing the up or
down arrow button. Press NEXT to return to the normal operating screen.
Step 2 Step 3
During normal operation one of three screens can be displayed. Pressing the NEXT button alternates between
these screens.
Normal Operating Screens
Screen 1
SET TIME
4:35
PM
5:20
SET TIME
PM
Exit
Programming
Mode
Screen 1 - Current Time of Day
Screen 2 - Capacity Remaining in Gallons
TIME
5:20
PM
GAL
CAPACITY REMAINING
2890