2
Getting Started
NXT Series Lockbox Getting Started Guide
Figure 1 Inserting a SentriCard® into a lockbox.
2. Wait for the lockbox to display the
CODE
light, then enter your PIN and press
ENT
.
3. The lockbox will display the
READY
light. Remove your SentriCard® from the lockbox.
The lockbox will open the key compartment
4. To close the lockbox key compartment, make sure the listing key is laying flat in the key
vault. Using both thumbs, press firmly on the top left and top right corners of the key door
until it won't push in any more.
Last update to this section: Friday, February 5, 2010.
How to Release the Shackle from one of your Lockboxes
1. Insert your SentriCard® into your lockbox. Wait for the lockbox to display the
CODE
light,
then enter your PIN and press
ENT
. Do not remove your SentriCard® from the lockbox.
2. When the lockbox displays the
READY
light, press
FUNC
+
1
+
ENT
. The lockbox will
begin beeping.
3. While firmly holding the lockbox, after five triple beeps the lockbox will display the
READY
light, indicating that it's time to pull the shackle out of the lockbox. The shackle
will come all the way out of the lockbox. If you are not holding onto the lockbox when the
shackle unlatches, it could fall to the ground!
