8
3.
When the READY light displays, press FUNC + 6 + 7 + ENT. The READY light will display.
4.
Remove your SentriCard® from the lockbox. The keypad backlight will flash for several seconds,
indicating that the keypad is being locked.
Note: You can test to see if the lockbox is locked by holding down any key for at least
one second. Nothing should happen, indicating it is successfully locked and ready for
storage.
Last update to this topic: August 16, 2016.
How to Assign a Lockbox to No Owner via SentriSmart™
If you would like to set a Bluetooth® REALTOR® Lockbox-EX to no owner, use the following steps via
SentriSmart™:
7.
Tap on Lockbox Tools in SentriSmart™.
8.
Press the ENT button on the lockbox keypad.
Note: The lockbox must have the most up to date firmware version in order to perform
this task.
9.
Tap on the lockbox serial number in the list.
10.
Tap on Assign to No Owner.
11.
Enter your PIN into SentriSmart™
12.
Tap OK.
Last update to this topic: August 16, 2016.
How to Check the Lockbox Firmware Version
The lockbox firmware check can be done two different ways:
1.
On the REALTOR® Lockbox Website:
a.
Go to the REALTOR® Lockbox Website at
b.
Click the Lockboxes/My Lockboxes tab.
c.
Search for the lockbox by serial number, owner, etc.
d.
The version number will be in the Firmware Version column of the results.
i.
The version number will also be displayed in the Firmware Version field of the
Edit Lockbox page, which can be accessed by clicking on the lockbox serial
number in the search results.
2.
The Lockbox Firmware Check Function:
a.
Press FUNC + FUNC + 43752 + FUNC + ENT on the lockbox keypad.
Note: Ownership privileges to the lockbox are required.
b.
Determine the number of beeps the lockbox emits. First, look at the hardware version of
the lockbox you are checking this on, for example; GENI/GENII, NXT/NXT Wireless,
Bluetooth® REALTOR® Lockbox, and then use the following chart to determine your
firmware version:
