Sentiotec WC4-BT-SPK, Инструкция по установке и эксплуатации

Страница: 14 / 36

Instructions for installation and use p. 6/8
4. Installation and electrical connection
Observe the following points when mounting the speakers:
● Mount the speakers as far away as possible from the heater, infrared radiators
or other sources of heat.
● NEVER install the device directly above the heater or other sources of heat.
● The environmental conditions (see point 6. Technical data on page 8) must
be observed.
1. Drill the mounting hole (average 110mm) in the cabin ceiling.
2. Lay the connection cables in the wall of the sauna cabin to the mounting
location of the bluetooth module or the power unit wave.com4 sound & light.
3. Fix the connecting cables with cable collars.
4. Bend the spring bows
1
and
2
upwards – as shown in the picture above.
5. Push the speaker into the mounting hole from below.
6. Leave out the spring bows.
► The spring bows snap back to the initial position and hold the speaker
in the ceiling.
7. Connect the cables to the bluetooth module or the power unit wave.com4
sound & light. Observe the assembly instructions for these devices.
1
2
Fig. 1:
Installation of the speakers