Sentiotec MySentio 1-053-313, Руководство пользователя, Страница: 5 / 76

EN
Installation and operating instructions p. 5/8
ATTENTION!
Interference can impair signal transmission
● Route all data cables separately from other mains cables and control cables.
● Protect cables with only one layer of insulation by using a conduit (double
insulation).
ATTENTION!
Damage to the device!
Installation of the app and input of the settings (see “5. Commissioning”) must
be completed before the sauna control unit is switched on.
30
27.5
4. Installation and connection
Work may only be carried out when the power has been disconnected.
During installation, observe the technical data on Page 8.
1. Secure the WiFi module somewhere near the sauna control unit and within
the range of its network (WiFi) using the screws provided.
2. Sentiotec WiFi is connected to the sauna control unit using the 8-pin Ethernet
cable in accordance with the following diagrams:
3. Make a note of the serial numbers (10 digits) of your devices to ensure you
can enter them in the app later on.
Sauna heater ................................................................................................
Sauna control unit ........................................................................................
Other products ..............................................................................................
4.1. Mounting and connecting MySentio WiFi
home.com4
PRO-B series
PRO-C series
PRO-D series
STB
Auto
FF
rd wt bk
RJ45
8-pin