Sentiotec 1-030-313, Руководство пользователя, Страница: 9 / 60

9/12
EN
OPERATING INTRUCTIONS
Connect the power unit to wall outlet, the LED indicator will start to blink on the display. Now it is possible to
switch on the infrared heaters, the light and the music function.
1) Startup
Press to switch on the cabin and heaters start to work, the length of time
is automatically set to 99 minutes and the air temperature inside the cabin will
be displayed. Press again switch off the heaters.
Press , or separately to adjust the power intensity of front/back/
calves heaters from 100%-0%.
2) Temperature settings
The upper display refers to the air temperature. Press , you can set the
desired temperature (35-60°C) using the / keys. When at this
temperature, the heaters will stop working automatically; When it fall 4°C
below this temperature, the cabin will start up automatically.
Please note: The maximum air temperature reachable in the cabin
may be lower than the desired temperature. This is dependent on
the temperature outside the cabin. Default temperatur = 40°C.
3) Time settings
The lower display refers to the length of time. Press , you can set the desired time (5-90mins) using
the / keys. When countdown to “00”, the heaters will shut off automatically.
4) Sky light
Short press , you can set the desired colour (7 colors totally); Long press to go into an automatically
cycling mode, changing colour every 5 seconds.
5) Fan
The fan has three modes: automatic, manual, close. The automatic mode is present when the heaters
switch on. In automatic mode, the fan switches on when the set cabin air temperature is reached.
Press once for manual mode, the fan switches on. Press once more for close mode, it switches off.
6) MP3 player
In the condition of connecting electricity, long press „M“, the MP3-player power on, (if the player is inserted with
an USB-disc, it will acquiescently play USB file), otherwise, the MP3 player will turn on Bluetooth by default. Then
turn on the Bluetooth search function of mobile phone and search „FJF - BT“ Bluetooth device. The MP3 player can
play music after successfully connecting the phone (Note: each mobile phone just can connect one MP3 player).
Press „ “ to pause playing. Press „ “ or „ “ to play the previous/next song.
Press the „ “ or „ “key to adjust the volume plus or minus, the adjustment range is 0 - 30 level.
Press the „M“ key, the MP3 player cycle Bluetooth- MP3 external input-FM function.
Long press „ “ in the FM state, the MP3 player search and sace the channels automatically (channels from
87.5 MHz to 108.5 MHz). After the searching finish, press „ “ or „ “, the MP3 player broadcast the stored
channels.
7) Remote control included