Monitor Controls
Front Panel
Back Panel
1.
Day/Night Switch
• Normally this switch should be in the out position ( DAY)
• When you view the picture at night or in a tunnel, etc, depress the switch to
reduce the picture brightness (
NIGHT)
2.
Camera Selector
• Depress the camera selector ( CA 1) to select the camera connected to CA 1
• Press the camera selector ( CA 2) to select the camera connected to CA 2
3.
MIR/NOR Switch
• When the switch is in NOR ( ) position, the picture wi ll be normally displayed.
• When the switch is in MIR ( ) position, the picture will be reversed.
4.
Contrast Control
• Adjust the contrast control for the desired overall best picture
• Turn clockwise to increase the picture contrast and counterclockwise to decrease it.
5.
Brightness Control
• Adjust the brightness control for the best overall picture or display brightness
• Turn clockwise to increase the picture brightness and counterclockwise to decrease
it
6.
Audio Control
• Adjust the audio volume for the desired level
• Turn clockwise to increase the audio volume and counterclockwis e to decrease it
7.
Power Switch
• Press the power switch ( ON) to turn the monitor ON
• Press the power switch again to turn the monitor OFF ( STAND BY). The
monitor is in the standby condition.
-4-
