15
14
EN
EN
F- USING
F1- Fast programming
Programming a code
Programming a badge
Door opening
Enter
programming
code
Enter
programming
code
Present the badge(s) to the keypad (each
programmed badge will automatically
increment the user number)
Trigger the opening through user code
To trigger the opening with a badge, you only have to present the badge to the keypad.
Exit
programming
mode
Exit
programming
mode
Programmed user code
Confirm
Confirm
Confirm
Confirm
Confirm
User code to 4 digits
(except 1234)
Add a code
Add a badge
User number
(from 1 to 100)
Default master code (999999)
Default master code (999999)
F2- Detailed Programming Guide
User Settings
To enter the programming mode
* Master code #
999999 is the default factory master code
To exit from the programming mode
*
Note that to undertake the following programming
the master user must be logged in
Setting the working mode:
Set valid card only users
Set valid card and PIN users
Set valid card or PIN users
3 0 # Entry is by card only
3 1 # Entry is by card and PIN together
3 2 # Entry is by either card or PIN (default)
To add a user in either card or PIN mode, i.e. in the 3 2 # mode.
(Default setting)
To add a PIN user
1 User ID number # PIN #
The ID number is any number between 1 & 100.
The PIN is any four digits between 0000 & 9999
with the exception of 1234 which is reserved.
Users can be added continuously without exiting
programming mode as follows: 1 User ID no 1 #
PIN # User ID no 2 # PIN #
To delete a PIN user
2 User ID number # Users can be deleted conti-
nuously without exiting programming mode
To change the PIN of a PIN user
(This step must be done out of
programming mode)
* ID number # Old PIN # New PIN #
New PIN #
To add a card user (Method 1) This is
the fastest way to enter cards, user
ID number auto generation.
1 Read card # Cards can be added continuously
without exiting programming mode
To add a card user (Method 2) This
is the alternative way to enter cards
using user ID Allocation. In this
method a user ID is allocated to a
card. Only one user ID can be
allocated to a single card.
1 ID number # Read card # User can be added
continuously without exiting programming mode
