Sentera Controls SDX-DM Series, Монтаж и эксплуатация

Страница: 4 / 8

www.sentera.eu
MIW-SDX-DM-EN-000 - 17 / 06 / 2021 4 - 8
back to the table of contents
SDX-DM
ELECTRONIC FAN SPEED
CONTROLLER
PRODUCT DESCRIPTION
The SDX-DM series are electronic fan speed controllers, which allow you to manually
adjust the rotational speed of single phase AC motors by varying the motor voltage
through phase angle control. The output can be regulated from minimum to maximum
or from maximum to minimum. The operating mode can be selected via Modbus
RTU. The controller is suitable for both inset (IP44) and surface mounting (IP54). All
parameters and settings can be adjusted via Modbus RTU communication.
ARTICLE CODES
Output regulation (from low to high or from high to low)
Code Rated current range [A]
SDX-1-15-DM
0,1—1,5
SDX-1-25-DM 0,2—2,5
INTENDED AREA OF USE
■
Manual control of the motor / fan speed in HVAC applications
■
For indoor use only
TECHNICAL DATA
■
Inset or surface mounting
■
Supply voltage (Us): 230 VAC / 50—60 Hz
■
Spring contact terminal block
■
Motor acceleration: kick start (from 2 to 20 seconds) or soft start
■
Regulated output to motor: Umin—Us
■
Minimum and maximum output voltage are adjustable via Modbus RTU
communication. Vmin: 20—70 % of Us and Vmax: 75—100 % of Us
■
Overheating protection
■
Operating mode selectable via Modbus RTU: from low to high speed or from high
to low speed
■
Enclosure:
► External: ASA, white colour (28049P), IP54 protection (according to EN 60529)
► Internal: polyamide, natural colour, IP44 protection (according to EN 60529)
■
Operating ambient conditions:
► temperature: 0—40 °C
► rel. humidity: 5—95 % rH (non-condensing)
STANDARDS
■
Low Voltage Directive 2014/35/EU
►
EN 60529:1991 Degrees of protection provided by enclosures (IP Code)
Amendment AC:1993 to EN 60529
► EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
■
EMC directive 2014/30/EU:
►
EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
► EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic
standards - Immunity for residential, commercial and light industrial
environments
►
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic
standards - Emission standard for residential, commercial and light-industrial
environments Amendments A1:2011 and AC:2012 to EN 61000-6-3