www.sentera.eu
MIW-RMFPM-2R-EN-000 - 28 / 05 / 2019
6 - 11
2.
Insert the crimped RJ45 cable through the opening on the rear plate and plug it
into the socket (See
Fig. 2
Mounting dimensions
.)
3.
Using suitable fastening materials (not supplied), position the room sensor at
least 1,5 m from the floor. When planning the installation, allow enough clearance
for maintenance and service. Mount the sensor in a well-ventilated area. Mind
the correct mounting position and unit dimensions. See
Fig. 2
and
Fig. 3
.
Fig. 1 Snap-fits release
Fig. 2 Mounting dimension
Fig. 3 Mounting position
2x Ø
6
59,8
9,
8
74,5
104,5
20
104,5
25,
6
70,
5
Correct
Incorrect
Position at min. 1,5 m
from the floor
4.
Do the wiring according to the wiring diagram (see
Fig. 4
).
Fig. 4 Wiring
5.
Put back the cover and snap it in.
6.
Switch on the mains supply.
5.
Optional settings
To assure correct communication, the NBT needs to be activated in only two devices
on the Modbus RTU network. If necessary, enable the NBT resistor via 3SModbus or
Sensistant (
Holding register 9
).
RMFPM-2R
MULTIFUNCTIONAL ROOM
CONTROLLER
