www.sentera.eu
MIW-MTP-D010-AT-BT-EN-000 - 06 / 02 / 2019
4 - 7
back to the table of contents
PRODUCT DESCRIPTION
MTP-D010 potentiometer series are intended for direct control of EC fans / motors
and actuators. They require a supply voltage of 3—15 VDC and provide a stepless
output signal that can be set by a rotary knob within a range adjustable via two
trimmers for Vmin (10—70 % Vin) and Vmax (30—100% Vin). They are suitable for
applications where a DC control signal is required. The -AT version features an off
position, while -BT provides control within the range Vmin—Vmax. Their enclosures
are splash-proof and suitable for both inset and surface mounting.
ARTICLE CODES
Code
Output
Off position
MTP-D010-AT
0, Vmin—Vmax
yes
MTP-D010-BT
Vmin—Vmax
no
INTENDED AREA OF USE
■
Applications where a DC control signal is required
■
For indoor use only
TECHNICAL DATA
■
Power supply: 3—15 VDC
■
Output:
►
MTP-D010-AT: 0, Vmin—Vmax
►
MTP-D010-BT: Vmin—Vmax
■
Load: R
L
≥ 2 kΩ
■
Vmin: 10—70 % Vin
■
Vmax: 30—100% Vin
■
Enclosure:
►
External: ASA, white-ivory (RAL 9010), IP54 (according to EN 60529)
►
Internal: polyamide, white-ivory (RAL 9010), IP44 (according to IEC 60335)
■
Operating ambient conditions:
►
temperature: 0—40 °C
►
rel. humidity: < 100 % rH (non-condensing)
►
Storage temperature: -10—55 °C
STANDARDS
■
Low Voltage Directive 2014/35/EC
■
EMC Directive 2014/30/EC
■
WEEE Directive 2012/19/EU
■
RoHs Directive 2011/65/EU
MTP-D010
ACTIVE
POTENTIOMETER
