Sentek PLUS Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 58

Sentek PLUS Скачать руководство пользователя страница 32

System Setup

Viewing Data

Copyright © 2005-2012 Sentek Pty Ltd All rights reserved

Page 24

It is recommended that the installer configures the downloads in a way that the end user can easily repeat
them without risk of download settings being changed and/or data being stored in the wrong location. FTP
server settings are saved in Data Exchange (DEX). Command line switches allow the DEX download
process to be run from a script (or batch file).

Please refer to the Data Exchange Help file for information on downloading and running operations from
command lines.

Hint:

IrriMAX (using DEX) requires the details of the FTP server where the data is being

stored. These details will be the same as what is entered in the probe, in the Destination

URL field. Copy the details before leaving the probe site.

Viewing

Graphs can be created with the IrriMAX software, using the information stored in the databases (.sdb files).

It is recommended that the data is made easily available for the end user. Graphs should be organized into
IrriMAX Workspaces that can be accessed by the end user without it requiring them to know where the
graph and workspace files are saved on the computer. To do this, shortcut icons for the workspaces (.sws
files) should be created on the customers desktop.

For further information on how to create, manipulate and save graphs, refer to distributor training notes and
the IrriMAX Help documentation.

«
...
30
31
32
33
34
...
»

Содержание PLUS



























































Отзывы:

Нет отзывов