STC-MBA5MUSB3/MCA5MUSB3
Product Specifications
13
Ver 1.00
B. Output Signals
1. Output Signal Functions
Using the software, the following functions can be set on “Output 1” and “Output 2” of the I/O
connector.
The polarity of Trigger Output Programmable, Trigger Output Loop Through, Exposure End, CCD Read
End Output, Strobe Output Programmable, Strobe Output Exposure and Trigger Valid Out is selectable.
Negative Polarity is recommended to use to reduce the timing delay due to open drain output.
1). Disabled
Set when no output signal is necessary.
2). General Output
Outputs high or low level signal set on the software.
3). Trigger Output Programmable
Outputs the trigger input signal with delay setting applied.
4). Trigger Output Loop Through
Outputs the trigger input sign (with a slight internal delay).
5). Exposure End
Output a signal upon the completion of the first line exposure.
(“Trigger Out Delay” and “Trigger Pulse Width” settings are applied.)
6). Read End Output
Output a signal upon the completion of the transfer of a full frame.
(“Trigger Out Delay” and “Trigger Pulse Width” settings are applied.)
7). Strobe Output Programmable
Output a signal for the period set with “strobe end delay”, starting at the trigger input signal with the
addition of “strobe start delay”
8). Strobe Output
Output a signal during the first lien of exposure*.
Function No.
Function Name
Polarity
1)
Disabled (Default)
-
2)
General Output
-
3)
Trigger Output Programmable
Positive or Negative
4)
Trigger Output Loop Through
Positive or Negative
5)
Exposure End
Positive or Negative
6)
Read End Output
Positive or Negative
7)
Strobe Output Programmable
Positive or Negative
8)
Strobe Output Exposure
Positive or Negative
9)
Trigger Valid Out
Positive or Negative
For More Information Please Call
Aegis Electronic Group, Inc. * (888) 687-6877 Phone * [email protected] * http://www.aegiselect.com
Aegis
Electronic
Group
www.aegiselect.com
