Sensor Technologies America, Inc.
1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006
Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)
www.SentechAmerica.com
4
STC-1100C & STC-1100D Series
Operating Manual
Rev. 0.2 - Updated September 26, 2005
Precaution
•
Handle the camera with care. Do not abuse the camera. Avoid striking or
shaking it. Improper handling or storage could damage the camera.
•
Do not pull or damage camera cable.
•
During camera use, do not wrap the camera unit in any material. This will
cause the internal temperature of the unit to increase.
•
Do not operate camera in wet areas and do not expose camera to
moisture.
•
Do not operate camera beyond its maximum operating temperature,
humidity and power source ratings.
•
To prevent dust or contamination from entering the CCD or filter area,
which could scratch or damage this area, keep lens or lens cap on camera
when camera is not in use.
•
Do not expose the camera to the following conditions:
- Wet, moist and/or high humidity areas
- Hot direct sunlight
- High temperature areas
- Near objects that release strong magnetic or electric fields
- Strong vibration
•
When cleaning the camera, use a soft cloth to clean the external areas of
the camera. Use a pressured air spray to clean the surface of the glass.
Do not scratch the surface of the glass.
•
Use only a REGULATED POWER SUPPLY and supply the power with the
specified voltage.
