8 of 33
Service Manual for the LuMon™ System
A.
Ventilation slot
B.
ON/OFF switch
C.
AC Power/Battery indicator
D.
Type label
E.
Fuse holders (2x)
F.
AC power inlet
G.
Integrated carrying handle
H.
Belt connector socket
I.
USB ports (2x) – only for use with
memory devices without external power
supply
J.
Serial ports (2x) – factory use only
K.
Ethernet port – factory use only
L.
Equipotentiality terminal connector
M.
Ventilation slot
N.
VESA 75 compatible mounting holes (4x)
2.3
Belt connectors
The belt connectors are designed to link belts to LuMon™ Monitors. Belt connectors control the injection of
very weak alternating currents into the patient’s thorax and the measurement of the voltages (electrical
potentials) resulting at the skin of the patient’s thorax.
2.3.1
SensorBeltConnector
The SensorBeltConnector (
) links a SensorBelt to a LuMon™ Monitor – Adult. The position sensor
embedded in its MatchBox permits the LuMon™ System to measure and display the patient’s position (
rotation
and
inclination
). If the SensorBeltConnector is properly connected to a LuMon™ Monitor in on-state, the status
indicator LED of its MatchBox continuously lights green if a SensorBelt is connected.
Figure 2-3: SensorBeltConnector
A.
MatchBox (includes a position sensor
and a status indicator LED) – connects
to SensorBelts
B.
ControlBox (with integrated electronics
and status indicator LED)
C.
Monitor plug – connects to the belt
connector socket on the LuMon™
Monitor
2.3.2
LuMon™ Connector
The LuMon™ Connector (
) links a LuMon™ Belt to a LuMon™ Monitor – Neo.
In contrast to the MatchBox of the SensorBeltConnector (
) the MatchBox of the LuMon™ Connector
contains neither a position sensor nor a status indicator LED.
Figure 2-4: LuMon™ Connector
A.
LuMon™ MatchBox – connects to
LuMon™ Belts
B.
ControlBox (with integrated electronics
and status indicator LED)
C.
Monitor plug – connects to the belt
connector socket on the LuMon™
Monitor