manualshive.com logo in svg

Sensus AR5000, Руководство пользователя


Поделиться
Скачать
background image

ii

Sensus Metering Systems

Sensus AR5000 User’s Guide

Copyright © 2006 Sensus Metering Systems. All rights reserved.

No part of this document may be reproduced or transmitted in any 
form or by any means, electronic or mechanical, for any purpose, 
without the express written permission of Sensus Metering Systems.

Sensus Metering Systems, the Sensus logo, AR5000, ...???... are 
trademarks or registered trademarks of Sensus Metering Systems.

Components of the TouchRead System are protected under U.S. 
patents 3,748,654; 4,132,981; 4,652,877; 4,758,836 and other 
pending.

Sensus cannot accept any financial or other responsibilities that may 
be the result of your use of this information including direct, 
indirect, special, or consequential damages. There are no warranties 
extended or granted by this document. Refer to separate Sensus 
warranty documents for product warranty coverage and specifics.

Sensus Metering Systems, 8601 Six Forks Road – Suite 300, Raleigh, 
NC 27615. 919-845-4000.

FCC notice

This equipment has been tested and found to comply with the limits 
for Class B digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for 

help.

Changes or modifications not expressly approved by Sensus Metering 
Systems could void the user's authority to operate this equipment.

Содержание AR5000























































































Отзывы:

Нет отзывов

Похожие инструкции для AR5000

Gen2wave iCAM M300 User Manual preview
iCAM M300
Бренд: Gen2wave Страницы: 44
Omega OM-EL-USB-1 Operation Manual preview
OM-EL-USB-1
Бренд: Omega Страницы: 12
Extech Instruments 42280 User Manual preview
42280
Бренд: Extech Instruments Страницы: 14
ACL Staticide ACL-750-USB Owner'S Manual preview
ACL-750-USB
Бренд: ACL Staticide Страницы: 78
Asper Systems AS300SA Settings Manual preview
AS300SA
Бренд: Asper Systems Страницы: 5
Transystem 747ProS User Manual preview
747ProS
Бренд: Transystem Страницы: 22
Kintech Engineering ORBIT 360 User Manual preview
ORBIT 360
Бренд: Kintech Engineering Страницы: 139
A&D AD-1687 Instruction Manual preview
AD-1687
Бренд: A&D Страницы: 32
Acksen DC-3V-RS User Instructions preview
DC-3V-RS
Бренд: Acksen Страницы: 2
ICP DAS USA I-7067 Quick Start Manual preview
I-7067
Бренд: ICP DAS USA Страницы: 7
Data Harvest EASYSENSE V-Log User Manual preview
EASYSENSE V-Log
Бренд: Data Harvest Страницы: 17
Hantek DMM-365A User Manual preview
DMM-365A
Бренд: Hantek Страницы: 36
METER EM50 Series Quick Start Manual preview
EM50 Series
Бренд: METER Страницы: 2
Ebro PEWA EBI - 6 Manual preview
PEWA EBI - 6
Бренд: Ebro Страницы: 35
Hioki LR5092 Instruction Manual preview
LR5092
Бренд: Hioki Страницы: 148
Triplett RHDL60 User Manual preview
RHDL60
Бренд: Triplett Страницы: 7
Triplett ACDL100 User Manual preview
ACDL100
Бренд: Triplett Страницы: 8
Triplett SLDL20 User Manual preview
SLDL20
Бренд: Triplett Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды