Sensual Spa's Pure Range, Инструкция по установке и эксплуатации

Страница: 18 / 31

FITTING THE DOOR HANDLES
Each of the two shower doors requires a pair of
chrome fi nished door handles to be fi tted.
Each handle is comprised of several parts. Position
the main handle part on the outside of a door
ensuring the Chrome Washer and a Clear Washer
are positioned also on the outside face over the
thread. Push the threaded ends through the glass.
Next place another clear washer on the threads
and then screw on the two diff erent Chrome Knobs
to the inside of the glass door.
Tighten until secure. DO NOT OVER TIGHTEN.
TEST FOR LEAKS
Make sure the connection is tested and is
watertight. You may wish to use some PTFE
tape or other suitable products to provide the
best water tight seal on this joint.
OVERHEAD SHOWER
The overhead shower is comprised of three parts.
A chrome ‘J’ shaped arm, a Chrome fi nished
overhead shower rose and a swivel joint. The joint
may be pre-fi tted to the shower rose.
The J Arm has two fi xing points on the straight
section that are threaded. Remove the fi xing nuts.
Position the threaded sections through the holes in
the upper part of the central glass tower panel on
the inside of the shower.
With the nuts that you removed, fasten at the rear
on to the protruding threaded ends to fi x the arm in
place.
Now connect the rose and swivel joint to the arm.
At the rear of the shower, connect the hose that is
coming from the top of the valve to the lower
(water in part) of the J Arm.