Floppy disk utilities
Senstar 100 Installation guide • • • 3 - 21
Duplicating disks
Ensure that the original Senstar 100 disks are write protected
BEFORE making backup copies.
1. Press
F3
.
2. When prompted, insert a 1.44 MB, 3.5” floppy disk into the floppy drive.
The source disk is the floppy disk that you want to duplicate.
3. Press any key.
4. When prompted, remove the source disk.
5. Insert a formatted destination disk.
The destination disk is the floppy disk to which you want to copy.
6. Press any key.
7. Once copying is complete, follow the prompts and exit to the
Floppy Disk
Utilities
menu.
8. Remove the duplicated disk from the floppy drive.
9. Label the disk.
10. Press
F4
or
ESC
to return to the
Senstar 100 Startup Program
menu.