Sensors & Software LMX200 Series, Руководство пользователя

Страница: 82 / 133

SliceView
82
8.2 LineView
Pressing this button displays the currently selected GPR line as a full screen image. All the
functionality of Line Scan (such as Depth, Color, Filter, Gain, DynaT, Soil Cal, Interps) are
available here (Figure 8-2). Use the
4-way directional keypad to change to a different line.
Figure 8-2: Changing LineView settings from within SliceView.
Press Back to return to SliceView. Any changes made will be reflected on the GPR line in
SliceView mode. If you change the Soil Cal or Zoom (depth), this will cause the depth slices to
be re-processed.
Users may want to change these display settings to make it easier to correlate line scan data
with depth slices.
8.3 Color
This heading has two button functions beneath it:
a) Color Palette - The number corresponds to the color palette used for the depth slice
image. Pressing this button cycles between the 9 available color palettes available on
the system.
b) Color Sensitivity - cycles between LOW , MEDIUM and HIGH . A setting of HIGH is
useful for revealing weaker targets which can sometimes be difficult to see. Setting to
LOW will h
elp “clean up” the data and only show the strong targets, but will hide some of
the weak signals so be careful when setting to LOW. Figure
8-3
shows the variations in
color sensitivity.