Sensors & Software LMX200 Series, Руководство пользователя

Страница: 57 / 133

Line Scan
57
surface and continue data collection. Once you reach the point where you initially started backing-
up, the system will continue acquiring new data.
You can also obtain depth and position information anywhere on the Line Scan by touching the
screen, holding for a second, then releasing. A cross-hair appears where you touched the screen,
with a box displaying the position and depth (Figure 6-6). To get the position and depth
information about a different point on the screen, simply touch and drag the box or cross-hair to
the desired position.
Figure 6-6: Touch screen to get depth and horizontal position at any point
Pressing Stop ends the line. This line is saved internally on the system and cannot be added to.
Use the Left and Right directional arrow buttons to scroll and view data not currently displayed on
the screen.
6.5 Flags
Flags are often inserted to mark noteworthy surface features, such as poles, sidewalks, changes
in terrain etc. These markers may help you correlate subsurface targets with above ground
features.
Pressing the
asterisk button on the keypad will insert a flag at your current position, either during
forward data acquisition or when backed-up. Flags are sequentially numbered (Figure 6-7).