SENSORMETRIX HTemp USB, Руководство по эксплуатации, Страница: 10 / 14

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
+44(0)845 451 2021
+44(0)118 976 9020
sales@sensormetrix.co.uk
www.sensormetrix.co.uk
sales
fax
email
web
10
USB Data Logger
Operation Manual
Rev 1.5
Get current setup information from the logger. Click this button (to the left), and
then the old setup information is shown below.
Operation Manual of USB Data Logger
--------P.7-----
Version:1.30
Get current setup information from the logger. Click this button, and then the old setup
information is shown below.
In the example below, the settings are as follows:
: Synchronize the new setup information and current PC time to the logger. After changing the
configuration, do not forget clicking this button to make sure that the new configuration is wrote to
the logger.
: Synchronize the PC time to the logger.
Name: Gives a name to the logger.
Type: The device type.
Model: The device model.
Serial No: Every logger has a SN with 10 characters. The length must be 10.
LOG Intervals(s): The interval of recording.
Log Count: The count of the logs that the logger has recorded.
Memory capacity: The total capacity of the logger memory. One reading includes time and three
channels’ data.
Temperature Unit: The selection of C and F.
Start Mode: There are three start modes: No Delay / Delay / Timer.
In the example below, the settings are as follows:
Operation Manual of USB Data Logger
--------P.7-----
Version:1.30
Get current setup information from the logger. Click this button, and then the old setup
information is shown below.
In the example below, the settings are as follows:
: Synchronize the new setup information and current PC time to the logger. After changing the
configuration, do not forget clicking this button to make sure that the new configuration is wrote to
the logger.
: Synchronize the PC time to the logger.
Name: Gives a name to the logger.
Type: The device type.
Model: The device model.
Serial No: Every logger has a SN with 10 characters. The length must be 10.
LOG Intervals(s): The interval of recording.
Log Count: The count of the logs that the logger has recorded.
Memory capacity: The total capacity of the logger memory. One reading includes time and three
channels’ data.
Temperature Unit: The selection of C and F.
Start Mode: There are three start modes: No Delay / Delay / Timer.
Operation Manual of USB Data Logger
--------P.7-----
Version:1.30
Get current setup information from the logger. Click this button, and then the old setup
information is shown below.
In the example below, the settings are as follows:
: Synchronize the new setup information and current PC time to the logger. After changing the
configuration, do not forget clicking this button to make sure that the new configuration is wrote to
the logger.
: Synchronize the PC time to the logger.
Name: Gives a name to the logger.
Type: The device type.
Model: The device model.
Serial No: Every logger has a SN with 10 characters. The length must be 10.
LOG Intervals(s): The interval of recording.
Log Count: The count of the logs that the logger has recorded.
Memory capacity: The total capacity of the logger memory. One reading includes time and three
channels’ data.
Temperature Unit: The selection of C and F.
Start Mode: There are three start modes: No Delay / Delay / Timer.
Synchronize the new setup information and current PC time to the logger. After
changing the configuration, do not forget to click this button (to the left) to make
sure that the new configuration is wrote to the logger.