6
4
1
2
3
3
left
right
MOuNTING SIDE
Stay outside of the detection
field to avoid disturbances.
Select the corresponding mounting side.
The sensor then learns its environment and automatically
determines the detection field. Both red LEDs flash slowly and
the 3 visible laser beams automatically light up during 30 seconds.
WITH BACKGROUND
WITHOUT BACKGROUND
The sensor memorizes the floor as reference point
and will signal a fault in case the orientation of the
sensor is changed (on purpose or by accident).
Adjust the
lateral position
of
the detection field.
Adjust the
tilt angle
of the
detection field with the hex
key.
Lock the position
of the
mounting bracket to avoid
malfunctioning in case of
extreme vibrations.
Unlock the sensor and activate the visible laser beams.
The visible laser beams indicate approximately
the postion of curtain C1 and limit the angle of
the detection field.
The visible laser beams stay activated for 15 minutes
or can be turned off the same way they were
activated.
POSITIONING
left
right
centre
C1
C2
C3
C4
