METIS MF11
Introduction
- 21 -
Metis MF Factory settings
Analog output:
0-20 mA
Device baud rate:
19,2 kBd
Emissivity:
100% for operation in single wavelength mode
Epsilon Slope
1,000 for operation in dual wavelength mode
Reduction Ratio
5% (refers to 95% signal reduction)
Exposition time:
5 ms
Device address:
00
Maximum storage:
Storage off
Subrange limits:
Basic measurement range
Interface response delay:
00 RS232 and 01 RS485 devices
Scope of delivery:
Every unit is equipped with optics of your choice, SensorWin software and 2.5 mm hex wrench.
A connecting cable is not included in the delivery and has to be ordered separately (see accessories).
Basic measuring ranges:
Metis MF 11
600...1300 °C
MB 13
750...1800 °C
MB 18
900...2500 °C *
MB 25 L
If the unit is equipped with laser pointer for aiming purposes, (Order Number Pos. 13 = 1) the following safety
caution becomes valid:
Safety advice!
The unit is equipped with class 2 laser product!
Do not stare directly into the laser beam radiated by the lens!
