MT3401E.doc rev.0
21/05/13
Pagina 63 di 86
4.5)
Modification or creation of a new configuration file
Via the
“Open”
command in the
“File”
menu existing configuration files will be
indicated and may be chosen and opened. If some parameters at the MU+S1
shall be modified, this has to be carried out as described in the following chapters.
Attention
Be careful to load the latest version of the configuration file.
If you are not sure then upload the actual file from the control panel, by the
“Upload
Configuration from CPU”
of the
“Communication”
menu.
Otherwise, create a new configuration file via the
“New”
command in the
“File”
menu.
4.5.1)
System information
Fig. 4.5.1) System Information screen
Fill the different field with the general informations regarding the site, the supplier of the
system, the installation company and the names of the persons.
