MT4061E Rev.2
15/10/2019
Pagina 40 di 45
In the main window, close to each channel (detector) its status will appear: TST (under TEST) or
FLT (fault). Now it will be easy to verify, directly in field, which modules or detectors are not
communicating on the RS485 bus and so fix the issues.
When these fault are fixed, the channels status in the main window will change from FLT to TEST.
3.8.2)
Modules
In the Zones screen, moving up and down with the arrow keys through the zones list
and pressing ENTER one gets into the modules screen
Fig. 3.8.2) Videata Moduli e modalità operative alla pressione del tasto 3-Modulo
3.8.3)
Relay outputs
In the modules screen, moving up and down with the arrow keys through the modules
list, choosing RIO OUTP and pressing ENTER one gets into the Relays screens.
Fig. 3.8 3 a) Outputs screen and options available pressing 3-Relay
Using the up/down arrow keys one may scroll through the list choosing one of the
channel and press 3-Relay for the
SET / UNSET
and
TEST / EXIT TEST
operations.
By the options of the relative screen, unlike the Operator level, the
“Maintenance” level
and the “Engineer” level may:
- Put in Set or Unset the selected relay
