MT4061E Rev.2
15/10/2019
Pagina 33 di 45
ACK
By pressing 1 ACK with the cursor on the active event, this will get acknowledged.
There are two situations:
1. the user is already logged in.
In this case by pressing 1 ACK the screen image will simply refresh and an “X” mark
will a
ppear on the “A” column (the “Acknowledged” column)
2. the user is not yet logged in.
In this case the LOGIN dialogue window pops up and the user should key in the
password. After which the “X” mark will be shown under the “A” column of the
related active event.
Practically this is the only situation when the login of an “Operator” level user is
required so that a trace is being kept about the person who acknowledged the active
event.
RESET
Pressing 2 RESET with the cursor on the active event previously acknowledged (the
one marked with "X"), this will get reset and the event will disappear from the active
events list. As described above, there are two situations:
1. the user is already logged in for a previous operation that requires login.
In this case pressing 2 RESET the screen image will simply refresh and delete the
event line from the list
2. the user is not yet logged in.
In this case the LOGIN dialogue window pops up and the user should key in the
password. After which the screen will be refreshed and the event deleted.
NOTE: A user with “Operator” level is NOT allowed to reset active events. He can only
acknowledge them so that the display image may be switched back to the main screen.
The reset may only be done by “Maintenance” or “Engineer” level users.
CHANNEL
Pressing 4-CHANNEL it is possible to do some operation regarding the channels
Pressing 4 PRINT, if a Printer is connected to the system the event details will be
printed out.
3.5.2)
EVENT LOG
The EVENT LOG is one of the main menu options (available on any user level). Use the
UP/DOWN keys to move to the EVENT LOG icon and press ENT.
This opens a screen that displays events in chronological order from the most recent
event.
