Sensica Sensifirm, Показания к применению, Страница: 15 / 44

English
17
•
If Sensifirm does not turn on:
Cleaning
Make sure to turn off and
unplug the device before
cleaning.
It is recommended to use a
soft damp cloth, paper towel
or pre-moistened wipe to
clean any residual Base Gel
from the Sensifirm. Make sure
the entire underside of the
device, including the
electrodes area, temperature
sensors and plastic cover, is
cleaned thoroughly. 1.
2.
Do not rinse the Sensifirm
device under running
water, as this may cause
device malfunction.
Keep the Sensifirm device
dry. Never place, store or use
your Sensifirm near bathtubs,
showers, basins or other
vessels containing water, as
this may cause electrocution.
If you do not plan on using
your Sensifirm device for a
long period of time, it is
recommended to keep it clean
and stored in its original box.
If you plan to travel and take
your Sensifirm with you, you
should store it in the original
box and follow the
maintenance instructions.
3.
4.
5.
Troubleshooting
If you experience any
problems with your Sensifirm,
please refer to the information
below:
Make sure that the power
cord is plugged in properly
to the electrical outlet and
into the device socket.
Make sure that the power
outlet has power. a.
b.
•
If Sensifirm does not deliver
RF signal energy and
massage (i.e. you cannot feel
the warm sensation or hear/
feel the gentle vibration):
Make sure there is full
contact of the electrodes
with the skin
Make sure that the Base
Gel has been applied
properly over the
treatment area.
The RF signal will be
activated only when at
least 2 of the electrodes
(the front pair or rear pair)
are in full contact with the
skin. (See indicator details
set out in the
User interface
description section above.
a.
b.
c.