Sensica Sensifirm, Показания к применению, Страница: 12 / 44

English
14
Preliminary Test
How to use Sensifirm device
The preliminary test is intended
to determine how your skin will
react to the Sensifirm treatment,
and to help you to find the most
comfortable setting for you, for
each treatment area.
Perform a preliminary test on
each area you intend to treat
48 hours before the first full
treatment.
Apply a thin, even layer of
the Base Gel included in your
kit, on the area that is
intended for treatment.
Set the RF energy level to
the level you found most
comfortable when you
carried out the preliminary
test. Press the RF energy
level selection button
1.
2.
Apply a thin, even layer of
Base Gel, included in your kit,
on the treatment area.
Plug in the Sensifirm device
and select RF energy level 3.
Place the Sensifirm device on
the desired treatment area
and move it in a circular
motion, for 3 minutes.
The treatment will create a
warm sensation on your skin.
However, if you feel your skin
is heating up too fast, reduce
the RF energy level, adjusting
it to suit your own comfort.
Stop the test immediately if
you do not feel comfortable,
or if you see adverse effects
such as severe redness or
blistering.
Wait 48 hours and examine
the tested area.
1.
2.
3.
4.
5.
6.
If the skin in the test area
seems normal (no adverse
effects) you can proceed with
a full treatment at the highest
comfortable energy level.
Note: The RF energy level indicates
the rate at which the temperature
rises when in heating mode. A high
RF energy level will enable you
faster and more even heating.
We recommend performing all
treatments at energy level 3
(highest). However, you can
achieve maximum results at all RF
energy levels: at lower levels, it will
just take longer to reach the
effective temperature.
Note: A preliminary test should be
conducted before proceeding to
a full treatment. (See Preliminary
test section above.
See treatment areas, treatment
time and treatments schedule in
the Recommended treatment
protocol section below.
7.