SensFit HABIT+ BAND Quick Start Guide
SensFit Proprietary
4
© 2020 SensFit. All rights reserved.
v0.1
Swipe to view the sleep cycle on the app
entrance page. Total time asleep (deep/light
sleep) and times disturbed are displayed.
Tap the circle with total time asleep to view the
detailed sleep cycle, as well as the weekly and
monthly statistics.
Heart Rate Monitor
Firmware Upgrade
If a red dot appears in
“
Settings
”
→
“
Firmware
upgrade
”, it indicates the current firmware
version is not the latest one and the HABIT+
BAND is ready for upgrade. Click on the
“
Firmware upgrade
” to proceed.
ⓘ
Sleep monitor requires user wearing
the HABIT+ BAND while sleeping.
ⓘ
The HABIT+ BAND should be in firm
contact with the skin on your wrist. Be
sure to tightly fasten the band, but not
too tightly that it cuts off circulation.
Contact Us
[email protected]://sensfithealth.com/
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
