SENSEO HD7810, Руководство пользователя, Страница: 16 / 26

Use the correct descaler
Only citric acid-based descalers are suitable for descaling the
SENSEO® machine. This type of descaler descales the machine
without damaging it. For the correct amount, see under ‘Descaling
procedure’ below. Each descaling mixture can be used only once. Use
a new descaling mixture each time.
Descaling procedure
The descaling procedure consists of 2 descaling cycles, each with 1
liter of descaling mixture, and 2 flushing cycles. Do not interrupt the
descaling cycles and do not switch off the machine before or between
the flushing cycles.
1 Press the on/off button to turn on the machine.
2 Place the 1-cup pod holder with a used coffee pod in it in the
coffee machine. Close the lid and make sure it is properly locked.
3
Mix the descaler powder with 1 quart (1 liter) of water in a
measuring jug. Stir until the powder is completely dissolved.
Note: You have to use 2 quarts (2 liters) of descaling mixture: one
liter for each descaling cycle.
4 Fill the water reservoir up to the MAX indication with the descaler
mixture.
5
Put the water reservoir back into the coffee machine. The machine
is ready for use when the indicator light lights up continuously.
6
Put a bowl with a capacity of at least 1.6 qt (1.5 liters) under the
coffee outflow unit to collect the descaling mixture.
7 Press the 2-cup button once and let the machine operate. Repeat
this until the water reservoir is empty.
Note: Make sure that you use up the descaling mixture completely
during the descaling cycle.
Warning: Never interrupt the descaling cycle.
8 Exchange the 1-cup pod holder for the 2-cup pod holder.Place a
used pod in the 2-cup pod holder and close the lid.
9 Repeat steps 3 to 7.
Warning: Never descale the SENSEO® coffee machine with the
lid open. Make sure the lid is properly locked.
10 Remove the used pod and clean both pod holders after descaling
with hot water and a dishwashing brush to prevent the sieve in the
center from getting clogged.
16
English