| IoT-Gateway-00 SERIES
12-24V DC POWERED OPERATING MANUAL
C
opyright © 2021 Sensata Technologies, Inc.
Page 9
5.1.10 SIMCARD
When you select this menu item details of the SIM Card contained within the IoT-
Gateway are displayed. This information consists of the following:
•
Network APN
•
User ID (if required by the network)
•
Network Password (if required by the network)
•
5.1.11 Modem Connection
This menu option gives details of the network connection made in the following format:
•
Operator:
•
Type:
This can be useful to know so that any known operator outaages can be reported
5.1.12 MQTT Server
Under this menu option you can find the IP or url address that the modem will connect to
when uploading data and also the port used on that connection.
5.1.13 Config Server
This menu option gives details of the IP or url address for the configuration server
together with the port used. The IoT-Gateway uses this connection to ensure its internal
time and date is accurate and can also be used to update settings on the IoT-Gateway.
5.1.14 Wired Inputs
The Wired Inputs menu item displays the current values of the four analogue and eight
digital wired inputs. The analogue values are displayed as 0-100% and the digital inputs
are displayed as either ON or OFF.
5.1.15 Wired Outputs
This menu displays the current value of the four relay outputs, these are displayed as
either ON or OFF.
5.1.16 Delete xx Values
This menu option allows you to delete the current values stored in the IoT-Gateway. This
is useful where the values have been obtained during commissioning tests, for example,
and you don’t want them to be uploaded to the IoT- platform.
5.1.17 Read Aux xxx Sec
The IoT-Gateway has the ability to be factory setup to read auxiliary inputs using its
optionally built-in RS232/RS485 or Ethernet serial ports. If this option has been requested