| IoT-Gateway-00 SERIES
12-24V DC POWERED OPERATING MANUAL
C
opyright © 2021 Sensata Technologies, Inc.
Page 1
|
IoT-Gateway-00
12-24V DC POWERED
IoT-Gateway
Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility
for damage, injury, loss or expense resulting from errors or omissions, and reserve the right of amendment
without notice.
Information for users
This equipment has been tested and found to comply with the limits for a Class B device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different to that which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Caution: To satisfy FCC RF Exposure requirements for mobile and base station transmission
devices, a separation distance of 20cm or more should be maintained between the antenna of this
device and persons during operation. To ensure compliance operation at closer than this distance
is not recommended. The antenna used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. No other antenna may be used with this
equipment other than the PCB antenna supplied with this equipment.
This document may not be reproduced in any way without the prior written permission of the company.
Cynergy3 Components Ltd
7 Cobham Road, Ferndown Industrial Estate, Wimborne
Dorset BH21 7PE, United Kingdom
Tel: +44(0)1202 897969, email: [email protected]