E - 14
CONNECTIONS
INSTALLATION
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be
wall-mounted with a VESA-compliant 3” x 3” (75mm x
75mm) mounting kit designed for flat-panel TVs (sold
separately). Mount this unit according to the instructions
included in the mounting kit.
NOTE
Remove the base stand before mounting the unit on
the wall.
3”
3”
CONNECT THE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the
/ I
button on the unit or remote control to turn
on the unit.
NOTE
• Be sure the AC power cord is disconnected and all functions
are off before making connections.
• Make sure that all the components are connected
correctly.
•
To prevent electrical shock, match wide blade of plug
to wide slot of wall outlet, then fully insert.
• When you are not going to use the unit for a long period of
time, disconnect the power cord.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on apparatus.
• Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during
intended use. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall
be disconnected from the mains socket outlet completely.
INSTALLING / REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact
with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack.
1. Disconnect all cables or cords connected to the unit.
2. Lay the unit down on a flat surface with the back side facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam) beneath the screen.
4. To remove the base stand, keep pressing the locking area
of the base stand and pull downwards to release the base
stand.
3. To install the base stand, place the base
stand on the mounting slot, push the stand
till it locks.
To AC wall
outlet
