2
www.senquip.com
ORB Configuration
If you are configuring the ORB for the first time, use a phone, tablet or laptop to access the ORB’s integrated
webserver. To activate the webserver, press the setup key on the ORB for 2 seconds and then connect to the ORB’s
Wi-Fi on your phone, tablet or laptop. Passwords for the ORB’s Wi-Fi and webserver can be found on a tear-off
sticker under the lid of the ORB. For further details on how to access the webserver, please see the “ORB-X1 User
Guide”. If the ORB is already available on the Senquip Portal, simply login to the Portal and make the required
changes remotely.
In this application, it is assumed that the ORB is powered via solar. To conserve energy, the rate of transmission is
set to 10 minutes. The ORB can be set to transmit the level via either Wi-Fi or GSM. The configuration of the
transmission is not covered in this application note.
Note that only settings used in connecting the ORB to the level sensor are discussed in this application note.
Power
1A Fuse
Ground
ORB-X1
Ground
Source 1
Source
Level Sensor
-
+
10W Solar
Panel
