Senquip ORB-X1-G Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 136

Senquip ORB-X1-G Скачать руководство пользователя страница 104

showing all the data associated with the selected ORB will be shown. To download the data, press the
Export to CSV button. The data will be saved to your downloads folder. The downloaded ﬁle can be
opened and manipulated with any spreadsheet tool.

Figure 9.6. Data associated with the selected ORB shown in a table

Note The timestamp in the timestamp column is in Unix Time; if you would like a GMT date and time
ﬁeld, enable the timestamp setting in endpoint settings.

9.1.5 User Administration

Use the Admin button to manage the users of an ORB. When an ORB is added to an account using the
device ID and password, the user that added the ORB automatically becomes an admin for that device.
Admin users can manage other user rights and have full permissions for the ORB. The diﬀerent user
types are detailed in the table below:

Allowed Permission

Admin

User View

View Data

Yes

Yes

Yes

View Users

Yes

Yes

Yes

Change Device Settings

Yes

Yes

Data Add/Remove Users

Yes

Warning Anyone who has the ORB device ID and setup password can add the device to their account
with Admin permissions.

9.1.6 Conﬁguraion via Senquip Portal

Settings associated with an ORB can be updated remotely via the Senquip Portal.  To change the settings
for  a  selected  ORB,  press  the  Settings  button  on  the  top  right  of  the  dashboard.    The  selected  ORB’s
settings  will  be  shown  and  can  be  changed  by  clicking  in  the  relevant  ﬁelds.    Once  a  setting  has  been
changed, press the Save Settings button at the bottom of the page.

The ORB checks for settings changes each time it makes a connection to the Senquip Portal. If the ORB is
set to transmit data once an hour, then the settings will be changed up to an hour after the changes have
been made on the portal. If quicker changes are required, the ORB will need to be visited and the
changes made via the integrated webserver in setup mode.

ORB User Guide, Release 1.1

98

Chapter 9. Senquip Portal

«
...
102
103
104
105
106
...
»

Содержание ORB-X1-G









































































































































Отзывы:

Нет отзывов