Senor AMON-15E, Руководство пользователя

Страница: 9 / 20

8
Purple ----> No VGA signal
Red ----> Sleep mode
Blue ----> Operating mode
3.3 LCD viewing angle adjustment
In order to accommodate various operator preferences and lighting
conditions, the AMON is equipped with an operator tilt mechanism. Two
buttons are located behind the middle left-hand edge of the operator
LCD. The uppermost button tilts the screen UP while the lower tilts the
screen DOWN. The tilt movement is limited to a minimum of 30 degrees
and a maximum of 70 degrees. To adjust the angle press and hold the
UP or DOWN button as required until the optimum viewing angle is
found or the LCD reaches its maximum or minimum limit
.
3.4 Power On
The Power Switch is located at the mid-bottom of front panel, where the
logo is. To turn on the monitor, press the button and the LED lamp will
illuminate. The status of the monitor can be distinguished from the color
of LED lamp:
When the monitor is in Operating mode (blue light), by pressing and
holding the power button for 3- 4 seconds, the monitor will switch to
Sleep mode (red light). By pressing and holding the power button again
(3-4 seconds), the monitor will switch back to Operating mode (blue
light), or Idle mode (purple light) if no VGA signal is present.
NOTE: Use only the AC adaptor
supplied with the AMON