Sennheiser Tourguide 2020-D, Инструкция по эксплуатации, Страница: 48 / 77

Tourguide 2020-D | 121
Operation
Setting a channel
To set the complete system to a certain channel, proceed as follows:
Set the bodypack transmitter/radio microphone to the desired channel (see
next section)�
Set one of the receivers to the same channel (see „Setting the channel on the
receiver“ on page 122)�
Automatically set all other receivers to the same channel using the channel
copy function (see „Setting the receiver channel(s) using the channel copy
function EZL 2020-20 L/L 2021-40“ on page 123)�
Setting the channel on the bodypack transmitter/ radio micro-
phone
To set the bodypack transmitter or the radio microphone to the desired channel,
use the operating menu of the device� An overview of the operating menus is
given from page 134 onwards�
Make sure that the lock mode is deactivated (see „Activating/deactivating
the lock mode“ on page 131)�
ON/OFF MUTE
SET
PEAK
ON/OFF
SET
MUTE
LOW BATT
Bodypack transmitter Radio microphone
Press the SET button�
The operating menu appears and the first menu item „ CHAN “ flashes on the
display�
Press the
SET button�
The current channel flashes on the display�
Press
▲
/
▼
to change the channel�
If you press
▲
, the display jumps to the next channel; if you press
▼
, he dis-
play jumps to the previous channel�
By pressing and holding the
▲
/
▼
buttons, the display cycles continuously
(repeat function)�
EN
DE
FR
IT
ES
NL
COMPLIANCE