106 | Tourguide 2020-D
Putting the components into operation
Setting up the charger
CAUTION
DANGER DUE TO HEAT ACCUMULATION!
The charger and the receiver rechargeable batteries can get very hot during
charging� If the heat cannot dissipate, the devices can be damaged�
Make sure that the air vents of the charger are not covered or blocked�
Provide sufficient ventilation so that the maximum ambient temperature of
the charger does not exceed 40°C�
Keep the charger away from heat sources and never expose it to direct sun-
light�
The charger can be:
• placed on a table or cabinet
• installed in a 19" rack
• installed in a cabinet or similar�
When using the “Conference Control” software, it automatically sorts all char-
ger displays according to ascending serial numbers� The assignment of the
charger displays of the software to the chargers becomes easier and clearer if
you install the chargers according to ascending serial numbers�
Placing the charger on a table or cabinet
The charger has four plastic feet to ensure that it cannot slip on the surface on
which it is placed�
CAUTION
RISK OF STAINING OF FURNITURE SURFACES!
Some furniture surfaces have been treated with varnish, polish or synthetics
which might cause stains when they come into contact with other synthetics�
Despite a thorough testing of the synthetics used by us, we cannot rule out the
possibility of staining�
Do not place the charger on delicate surfaces�
Place the charger on a table, cabinet or similar�