Sennheiser Tourguide 1039, Инструкция по эксплуатации

Страница: 21 / 28

Configuring the receiver
20 |
Tourguide 1039
Via the “ Channels ” menu, you can call up the “ Setup Ch 1 ” ... “ Setup Ch 32 ”
submenu.
The “ Setup Ch 1 ” ... “ Setup Ch 32 ” menu
Entering a name – “Name”
Via the “ Name ” menu, you can enter a freely selectable name for the
receiving channel (e.g. the language of the guided tour). The name is dis-
played on the standard display and can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Changing the receiving frequencies of the channels – “Tune”
Via the “ Tune ” menu item, you can change the receiving frequency of a
channel.
The receiver’s channels have been factory-preset to receiving frequencies
that are intermodulation-free. However, you can change the factory-preset
frequencies. Within one frequency range, up to 32 transmission links can be
operated simultaneously.
To change the receiving frequency of the channel:
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
Setup Ch 2
W n g l i s h
Name
Name
Name
W n g l i s h E n glish
“Stored”
왘
Press the rocker button to select a character.
왘
Press the SET button to change to the next segment/character
or to store the complete entry.
SET
It is vital to observe the notes on frequency selection in the chapter
“Matching the transmitter to the receiver” on page 22.
Select the MHz
value and confirm
Select the kHz value;
store the setting
Tu n e Tu n e
Call up “Tune”
Setup Ch 2
Tune
“Stored”
863.500 MHz
864 .500 MHz 864. 300 MHz
SET SET
SET
왘
Press the rocker button to adjust the frequency in MHz steps.
왘
Press the SET button to confirm the MHz setting of the fre-
quency.
The kHz section of the frequency is highlighted.
왘
Press the rocker button to adjust the frequency in 25 kHz steps.
왘
Press the SET button to store the setting.
“ Stored ” appears on the display panel.
SET
SET