Sennheiser Tourguide 1039, Инструкция по эксплуатации

Страница: 23 / 28

Configuring the transmitters for your Tourguide application
22 |
Tourguide 1039
Configuring the transmitters for your
Tourguide application
Please also read the instruction manual for your transmitter. It provides
important information that ensures safe and optimum operation of the trans-
mitter in your Tourguide application.
Matching the transmitter to the receiver
The receiver’s channels have been factory-preset to receiving frequencies
that are intermodulation-free (see frequency table on page 26). However,
you can change the factory-preset frequencies. Within one frequency range,
up to 32 transmission links can be operated simultaneously.
왘
Make sure to set the transmitter of the evolution wireless G3, G4 or 2000
series to the same frequency as the receiver.
If you still cannot establish a transmission link between transmitter and
receiver, read the chapter “If a problem occurs ...” on page 23.
Configuring the mobile SK, SKM and SKP transmit-
ters
1. Set the frequency that you want to use for your Tourguide application
(“ Tune ” menu item).
2. Adjust the input sensitivity of the microphone (“ Sensitivity ” menu item;
for presentation applications, the guide values range from approx. –21 dB
to 0 dB).
Configuring the stationary SR monitoring trans-
mitter
1. Set the frequency that you want to use for your Tourguide application
(“ Tune ” menu item).
2. Set the transmitter to mono operation to avoid interference during RF
transmission (“ Mode ” menu item).
3. Adjust the input sensitivity of the transmitter (“ Sensitivity ” menu item;
for presentation applications, the guide values range from approx. –21 dB
to 0 dB).
To be able to establish a transmission link, the transmitter and
receiver used must operate in compatible frequency ranges (see
page 4) and must be set to the same frequency.
Make sure that the desired frequencies are approved and legal in
your country and, if necessary, apply for an operating license.
You can contact your Sennheiser partner who will be pleased to cal-
culate intermodulation-free frequencies for you or to help you apply
for an operating license.
SK
SKM
SKP
Stereo Transmitter SR 2000 IEM
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
AF I AF II
516.000
B.Ch: 1 1
EQ
Standard -18dB
MHz
**2000**
Stereo Transmitter SR 2050 IEM
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
AF I AF II
516.000
B.Ch: 1 1
EQ
Standard -18dB
MHz
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
AF I AF II
516.000
B.Ch: 1 1
EQ
Standard -18dB
MHz
**2050** **2050**
531.375
ew300IEM B.Ch: 20.24
EQ
Standard -18dB
MHz
Stereo Transmitter
PEAK
-30
-40
AF
0
-20
-30
-40
AF I
-30
-40
AF II AF II
-10
SR
SR 300 IEM