Sennheiser SpeechLine Скачать руководство пользователя страница 53

Страница: 53 / 214

Multi-room mode

Single-room setup with SL Rack Receiver DW only

▷

Install all receivers in one rack (see „Installing receivers in

a rack“).

▷

Connect all cables for the receivers (see „Connecting the

receiver“).

▷

Mount all antennas as recommended and feasible (see

„Recommendations on antenna mounting“).

▷

Ensure that all receivers are switched off.

▷

Switch on the first receiver. This receiver will become the

Master.

▷

If necessary, pair a transmitter. Only if necessary, as the

sets are delivered already paired.

▷

Wait until both the LED of the receiver and the LED of the

transmitter light up green.

▷

Perform a walk test to ensure the best reception coverage

(see „Performing a walk test (reception quality)“).

▷

Switch on all other receivers. They will synchronize with

the Master. Make sure to leave the Master receiver

switched on during this step.

Single-room setup with SL Multi-Channel Receiver

DW only

▷

Install the SL Multi-Channel Receiver DW on a wall or the

ceiling with the front side of the receiver facing into the

room (see „Mounting the receiver“).

▷

Connect a LAN cable supplying PoE to the

Dante I / PoE /

Ctrl

RJ-45 socket of the first SL Multi-Channel Receiver

DW (see „Connecting the receiver“).
This receiver will become the Master.

▷

Wait until the LEDs of the receiver light up red.

▷

Connect a LAN cable supplying PoE to the respective

Dan

Содержание SpeechLine























































































































































































































Результаты поиска

Содержание SpeechLine

Отзывы:

Бренды по названию

Популярные бренды

Sennheiser SpeechLine, Руководство пользователя

Результаты поиска

Содержание SpeechLine

Отзывы:

Бренды по названию

Популярные бренды