Sennheiser SpeechLine Digital Wireless Series, Системная документация

Страница: 142 / 188

Performing a walk test (reception quality)
141
▷ Click Stop to end the walk test.
If the result of the walk test is not satisfying, you can take the following re-
medial measures:
• If possible, position the receiver so that there is always a direct line of
sight between the receiver and the paired transmitter.
• If possible, remove obstacles between the transmitter and the receiver.
• If necessary, adjust the manually selected transmission power in the
Control Cockpit under RF power mode on the RF settings tab. You can
find more information under „Multi-room mode“.
Performing a walk test with the SL Rack Receiver DW in the Control
Cockpit
To perform a walk test in the Control Cockpit :
▷ Switch on the transmitter and the receiver of the radio link you want to
check.
▷
In addition, switch on all other devices that you want to use in the op-
erating environment.
▷
Select the device in the Control Cockpit .
▷ Open the RF settings tab.
►
▷ Click Start under Walk test .
►
▷
Walk the operating environment with the transmitter.
The display of the radio signal level is continuously updated.
▷
Click Stop to end the walk test.
If the result of the walk test is not satisfying, you can take the following re-
medial measures: