Sennheiser SKP 2000, Инструкция по эксплуатации

Страница: 23 / 38

22
Adjusting settings via the operating menu
The extended menu “ Advanced Menu ”
Setting the transmission frequencies for the frequency banks
“U1” to “U6” – “Tune”
Via the “ Tune ” menu item, you can:
1. set a transmission frequency to be stored in the current channel of the
frequency bank (“ U1 ” to “ U6 ”)
2. or select a frequency bank (“ U1 ” to “ U6 ”) and a channel and assign this
channel a transmission frequency.
Setting a transmission frequency for the current channel
왘
Set the desired frequency.
When you have selected one of the system banks and then select
the “
Tune ” menu, the plug-on transmitter automatically switches
to channel 1 of the frequency bank “ U1 ”. In this case, “ U1.1 ”
briefly appears on the display panel.
Upon delivery, the channels of the frequency banks “ U1 ” to “ U6 ”
are not assigned a transmission frequency.
When you are in the “ Tune ” menu item, the RF signal is
deactivated.
It is vital to observe the notes on frequency selection on page 26.
왘
Press the UP/DOWN button until the “ Tune ” menu item
appears.
왘
Press the SET button.
The frequency selection appears.
왘
Press the SET button.
Your settings are stored. The “ Tune ” menu item appears.
SET
543 .850 MHz
Tu n e
543. 850 MHz
B.Ch: U. 1 B.Ch: U. 1
Tu n e Advanced Menu
Tune
“Stored”
Select the MHz
value and confirm Select the kHz
value; store the
setting Call up “Tune”
SET