Sennheiser SKP 2000, Инструкция по эксплуатации

Страница: 21 / 38

20
Adjusting settings via the operating menu
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Overview of the frequency banks and channels:
... correctly The audio level display “ AF ”
햲
shows full deflection
only during the loudest passages.
... too low The transmission link is undermodulated. This
results in a signal with high background noise.
Adjust a low input sensitivity when using condenser microphones,
adjust a high input sensitivity when using dynamic microphones.
When you are in the “ Frequency Preset ” menu item, the RF signal
is deactivated.
Frequency bank Channels Type
“ 1 ” to “ 20 ” up to 64 per
frequency
bank System bank:
frequencies are factory-preset
“ U1 ” to “ U6 ” up to 64 per
frequency
bank User bank:
frequencies are freely selectable
When setting up multi-channel systems, please observe the
following:
Only the factory-preset frequencies within one frequency bank
(“
1 ” to “ 20 ”) are intermodulation-free. It is vital to observe the
notes on frequency selection on page 26.
Input sensitivity
adjusted...
Effect/display
Menu
B.Ch: 18.26
Frequency Preset B.Ch:
546.550MHz
Frequency Preset
18 .26 B.Ch:
Frequency Preset
19. 26
Call up “Frequency
Preset” Select the frequency
bank and confirm Select the channel;
store the setting
“Stored”
538.475MHz