Sennheiser SKP 100 G3, Инструкция по эксплуатации

Страница: 16 / 24

15
Adjusting settings via the operating menu
Setting a transmission frequency for the current channel
왘
Set the desired frequency.
Selecting a channel and assigning this channel a frequency
왘
Set the desired channel.
왘
Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the MUTE switch
쐎
, refer to page 9.
왘
Press the UP button (
왖
)/ DOWN button (
왔
) until the “ Tune ”
menu item appears.
왘
Press the SET button.
The frequency selection appears.
왘
Press the SET button.
Your settings are stored.
You are back to the operating menu.
왘
Press the UP button (
왖
)/ DOWN button (
왔
) until the “ Tune ”
menu item appears.
왘
Keep the SET button pressed until the frequency bank selec-
tion appears.
왘
Press the SET button.
The frequency selection appears.
Mode Function
“ AF On/Off ” When the switch is in the MUTE position,
no audio signal is transmitted.
“ RF On/Off ” When the switch is in the MUTE position,
the RF signal is deactivated.
“ Disabled ” The muting function is deactivated.
SET
Select the MHz
value and confirm Select the kHz
value; store the
setting
543 .200 MHz
Tu n e
548. 200 MHz
B.Ch: U. 1 B.Ch: U. 1
Tu n e
Call up “Tune”
Advanced Menu
Tune
“Stored”
SET
SET SET
SET
SET
Select the frequency
bank and confirm
548.200 MHz
B.Ch: U. 1 B.Ch: U. 1
Tu n e
Call up “Tune”
(special function)
Advanced Menu
Tune
548.200 MHz
548 .200 MHz
Tu n e
Select the channel;
store the setting
SET SET
SET
Call up
“Mute Mode” Select the desired
setting Store the setting
Advanced Menu
Mute Mode
Mute Mode Mute Mode
RF On/Off AF On/Off
“Stored”
SET
SET