Sennheiser SKM 9000, Инструкция по эксплуатации

Страница: 30 / 109

Digital 9000 | 29
Preparing the Digital 9000 system for use
Connecting devices to the digital audio outputs
When equipped with an DAO digital audio out module, the EM 9046
receiver has 8 digital balanced audio outputs. The signals are output in
AES3 format.
왘
Connect the digital audio inputs of an external device to the XLR-3
sockets
A
or the sub-D socket
B
of the EM 9046.
If you are using the XLR-3 sockets
A
:
왘
Use a special double-shielded 110

AES3 cable. This prevents that the
digital data transmission interferes with RF reception.
Daisy chaining receivers
The EM 9046 receivers feature an integrated antenna splitter so that up to
four receivers can be daisy chained. This allows you to use two antennas/
antenna boosters for up to four receivers. In this case, all receivers have to
use
the same booster frequency range.
왘
Use GZL 9000 antenna cables to connect two antennas via antenna
boosters to the
RF IN N-type sockets
E
and
F
of the first receiver.
For the pin assignment of the XLR-3 and sub-D sockets of the
EM 9046, refer to the chapter “Specifications” on page 106.
Ready-made AES3 cables are available from Sennheiser (optional
accessories).
EM9046
XLR XLR XLR XLR DIGITAL MULTICORE
A B D C E F
A
B